# ---------------------------------------------------------------------------
!if !$d(BCB)
BCB = $(MAKEDIR)\..
!endif

# ---------------------------------------------------------------------------
# IDE SECTION
# ---------------------------------------------------------------------------
# The following section of the project makefile is managed by the BCB IDE.
# It is recommended to use the IDE to change any of the values in this
# section.
# ---------------------------------------------------------------------------

VERSION = BCB.05.03
# ---------------------------------------------------------------------------
PROJECT = dxPSCorec5.bpl
OBJFILES = dxPSPrVwStd.obj dxPSRes.obj dxFEFDlg.obj dxBrhDlg.obj dxBase.obj \
  dxPrnPg.obj dxPSGlbl.obj dxfmClr.obj dxPcPrVw.obj dxPrnDlg.obj dxPreVw.obj \
  dxPSCore.obj dxPPAttr.obj dxPrnDev.obj dxBkgnd.obj dxWrap.obj dxPSUtl.obj \
  dxFmMnPg.obj dxfmZoom.obj dxPgSDlg.obj dxPSImgs.obj dxPSPrVwOpt.obj dxPSfmLnkAdd.obj \
  dxPSfmttl.obj dxPSPopupMan.obj dxfmpnfmt.obj dxfmDTFmt.obj dxPSfmEditDesc.obj \
  dxfmDfnStl.obj dxPSEvnt.obj dxPSESys.obj dxPSEngn.obj dxPSPrVw.obj dxPSForm.obj \
  dxPSGraphicLnk.obj dxPSCompsProvider.obj dxPSCPDsg.obj dxPSfmCompositionAdd.obj \
  dxPSfmCompositionDsg.obj dxPSPgsMnuBld.obj dxfmChFN.obj dxExtCtrlsStrs.obj \
  dxExtctrls.obj dxPSBaseGridLnk.obj dxPSEdgePatterns.obj \
  dxPSFillPatterns.obj dxPSContainerLnk.obj dxPSDBBasedXplorer.obj dxPSExtDlgs.obj \
  dxPSFileBasedXplorer.obj dxPSfmReportProperties.obj dxPSShapes.obj dxPSTextLnk.obj \
  dxPSStandardFillPatterns.obj dxPSXplorerTreeView.obj dxPSSngltn.obj dxPSHFToolbarBld.obj \
  dxPSFMAutoHFTextFmt.obj dxPSAutoHFTextMNUBld.obj dxPSCoreC5.obj
RESFILES = dxPSCoreC5.res
DEFFILE =
RESDEPEN = $(RESFILES) dxPSPrVwStd.dfm dxFEFDlg.dfm dxfmClr.dfm dxPrnDlg.dfm \
  dxfmZoom.dfm dxPgsDlg.dfm dxBrhDlg.dfm dxfmChFN.dfm dxfmpnfmt.dfm dxfmDTFmt.dfm \
  dxfmDfnStl.dfm dxPSPrVwOpt.dfm dxPSfmttl.dfm dxPSfmEditDesc.dfm dxPSfmLnkAdd.dfm \
  dxPSCPDsg.dfm dxPSfmCompositionAdd.dfm dxPSfmCompositionDsg.dfm dxPSContainerLnk.dfm \
  dxPSTextLnk.dfm dxPSfmReportProperties.dfm dxPSExtDlgs.res 
LIBFILES =
LIBRARIES =
SPARELIBS = VCL50.lib
PACKAGES = VCL50.bpi vcldb50.bpi dxcomnc5.bpi cxLibraryVCLC5.bpi vclx50.bpi vcljpg50.bpi
# ---------------------------------------------------------------------------
PATHCPP = .;
PATHASM = .;
PATHPAS = .;
PATHRC = .;
DEBUGLIBPATH = $(BCB)\lib\debug
RELEASELIBPATH = $(BCB)\lib\release
SYSDEFINES = NO_STRICT;_RTLDLL;USEPACKAGES
USERDEFINES =
# ---------------------------------------------------------------------------
CFLAG1 = -I$(BCB)\include;$(BCB)\include\vcl -O2 -Hc -H=$(BCB)\lib\vcl50.csm -w -Ve -a8 \
  -k- -vi -c -b- -w-par -w-inl -Vx -tWM -D$(SYSDEFINES);$(USERDEFINES)
PFLAGS = -DBCB -U"$(SEARCHPATH)";$(LIBDIR);$(BCB)\lib\obj;$(BCB)\lib;$(RELEASELIBPATH) \
  -I$(BCB)\include;$(BCB)\include\vcl -$Y- -$L- -$D- -$C- -v -JPHNE -M -LUdclstd50
RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl
AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
LFLAGS = -L"$(SEARCHPATH)";$(LIBDIR);$(BCB)\lib\obj;$(BCB)\lib;$(RELEASELIBPATH) \
  -D"ExpressPrinting System by Developer Express Inc." -aa -Tpp -x -Gn -Gpr -Gl -Gi
# ---------------------------------------------------------------------------
ALLOBJ = c0pkg32.obj Memmgr.Lib $(PACKAGES) sysinit.obj $(OBJFILES)
ALLRES = $(RESFILES)
ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mti.lib
# ---------------------------------------------------------------------------
!ifdef IDEOPTIONS

[Version Info]
IncludeVerInfo=1
AutoIncBuild=0
MajorVer=1
MinorVer=0
Release=0
Build=0
Debug=0
PreRelease=0
Special=0
Private=0
DLL=1
Locale=1033
CodePage=1252

[Debugging]
DebugSourceDirs=$(BCB)\source\vcl

[Parameters]
RunParams=
HostApplication=
RemoteHost=
RemotePath=
RemoteDebug=0

[Compiler]
InMemoryExe=0
ShowInfoMsgs=0

!endif

# ---------------------------------------------------------------------------
# MAKE SECTION
# ---------------------------------------------------------------------------
# This section of the project file is not used by the BCB IDE.  It is for
# the benefit of building from the command-line using the MAKE utility.
# ---------------------------------------------------------------------------

.autodepend
# ---------------------------------------------------------------------------
!if !$d(BCC32)
BCC32 = bcc32
!endif

!if !$d(DCC32)
DCC32 = dcc32
!endif

!if !$d(TASM32)
TASM32 = tasm32
!endif

!if !$d(LINKER)
LINKER = ilink32
!endif

!if !$d(BRCC32)
BRCC32 = brcc32
!endif
# ---------------------------------------------------------------------------
!if $d(PATHCPP)
.PATH.CPP = $(PATHCPP)
.PATH.C   = $(PATHCPP)
!endif

!if $d(PATHPAS)
.PATH.PAS = $(PATHPAS)
!endif

!if $d(PATHASM)
.PATH.ASM = $(PATHASM)
!endif

!if $d(PATHRC)
.PATH.RC  = $(PATHRC)
!endif
# ---------------------------------------------------------------------------
$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
    $(BCB)\BIN\$(LINKER) @&&!
    $(LFLAGS) +
    $(ALLOBJ), +
    $(PROJECT),, +
    $(ALLLIB), +
    $(DEFFILE), +
    $(ALLRES)
!
# ---------------------------------------------------------------------------
.pas.hpp:
    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }

.pas.obj:
    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }

.cpp.obj:
    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }

.c.obj:
    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }

.asm.obj:
    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@

.rc.res:
    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
# ---------------------------------------------------------------------------